Sea & Sea YS-D1 Instruction Manual page 16

Identification of Parts
Fixing Bolt
If attaching the unit to an arm or other part, insert the fixing bolt from
the side of the YS Mount Strobe Adaptor which does not have a nut
inserted and tighten to secure.
《 Correct 》
Fixing Bolt
Attaching from the opposite direction
At factory shipment, the fixing bolt is inserted
to be attached from the left side as seen
from the front of the housing; however, by
changing the direction of attachment of the
YS Mount Strobe Adaptor, you can also
attach it from the right side.
Be sure to change the direction of attachment
for the YS Mount Strobe Adaptor. Failure to do
so may cause the YS Mount Strobe Adaptor or
other parts to become damaged.
When attaching the YS Mount Strobe Adaptor ,
always refer to [YS Mount Strobe Adaptor / Ball
Mount Strobe Adaptor] (P.E-14) for details.
CAUTION
Please be careful when attaching the YS Mount Strobe Adaptor as inserting
the fixing bolt from the side that does not have a nut inserted may lead to it
or other parts becoming damaged.
Do not tighten the fixing bolt up on the product unless it is being attached
to an arm.
Remove the fixing bolt from the product when storing.
E-15
YS Mount Strobe
Adaptor
nut
《 Wrong 》
Fixing Bolt