Grating & Shredding Disc; Variable Slicing & Julienne Disc - Dualit XL1500 Instruction Manual & Guarantee

GRATING & SHREDDING DISC
Do noT UsE Discs for lonGEr Than 45 sEconDs aT a TimE.
processer to cool if you go over the max run time.
2
SELECT GRATE
OR
OR
OR
Select the fine or coarse side Place the reversible grating
of the grating/shaving disc to disc on the spindle and push
suit your requirement.
down firmly to locate.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
2
SELECT SHRED
OR
Select the fine or coarse side Place the reversible
of the shredding disc to suit shredding disc on the spindle
your requirement. and push down firmly to
NOTE: Very sharp. Hold locate.
plastic hub to avoid injury.
Do not USE DiSCS with AUto pULSE.
3
LOCK ON SPINDLE LOCATE ON BOWL
Place the spindle and grating
disc assembly onto the bowl
drive of large processing
bowl.
3
LOCK ON SPINDLE LOCATE ON BOWL
Place the spindle and
shredding disc assembly onto
the bowl drive of large
processing bowl.
10
VARIABLE SLICING & JULIENNE DISC
Allow TakE caUTion as blaDEs arE sharp. Do not USE with AUto pULSE.
SLICE THICKNESS
To adjust the slicing thickness,
rotate the outer spindle
anti-clockwise to make slices
thicker, or clockwise to make
thinner slices. NOTE: Very sharp.
Hold plastic to avoid injury.
CORRECT WAY UP
The julienne disc must be
inserted with the cutting face
upwards.
NOTE: Very sharp. Hold
plastic hub to avoid injury.
2 3
LOCK ON SPINDLE FOR LARGE &
MEDIUM BOWLS
Fit the slicing disc over the The adjustable slicing disc
spindle and press firmly into can only be used with the
place. large and medium bowls.
It creates any slice thickness
between 0.5mm and 7.5mm.
2 3
LOCK ON SPINDLE
The julienne disc can only be
Fit the julienne disc over the
spindle and press firmly into used with the large and
place. medium bowls.
11
FOR LARGE &
MEDIUM BOWLS