Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the palm-rest assembly at the edge of the table with the speakers
facing away from the edge.
2
Align the screw holes on the palm-rest assembly with the screw holes on
the display hinges.
3
Replace the screws that secure the display hinges to the palm-rest
assembly.
4
Adhere the tape and route the touch-screen cable through the routing
guides on the fan.
5
Connect the touch-screen cable and display cable to the system board.
6
Replace the screw that secures the display-cable bracket to the system
board.
Post-requisites
1
Replace the
wireless
2
Replace the battery.
3
Replace the
base
computer. After working inside your
card.
cover.
After working inside your
61