Philips DVP3350 User Manual page 29

[ TV System ]
If the video does not appear correctly,
change the setting. By default, this setting
matches the most common setting for TVs
in your country.
• [ PAL ] – for PAL-system TV.
• [ Multi ] – for TV that is compatible
with both PAL and NTSC.
• [ NTSC ] – for NTSC-system TV.
[ TV Display ]
Select the screen format according to how
you want the picture to appear on the TV.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
• [ 4:3 Pan Scan ]
full-height screen display with the sides
trimmed.
• [ 4:3 Letter Box ]
'wide-screen' display with black bars on
the top and bottom.
• [ 16:9 ] – for wide-screen TV (frame
ratio 16:9).
[ Progressive ]
If a progressive scan TV is connected to
the DVD player, turn on progressive scan
mode.
• [ On ] – turn on progressive scan
mode.
• [ Off ] – disable progressive scan mode.
Tip
•
There is more detailed description available. See
chapter 'Get Started - Turn on Progressive Scan' for
details.
16:9 (Wide Screen)
– for standard TV, a
– for standard TV, a
[ Picture Setting ]
Select a predeÀ ned set of picture colour
settings or customise the personal setting.
• [ Standard ] – original colour setting.
• [ Bright ] – vibrant colour setting.
• [ Soft ] – warm colour setting.
• [ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, tint and colour saturation, then
press OK.
[ Component Video ]
Select the video output that matches the
video connection between this DVD
player and the TV.
• [ Interlaced ] – for component video
(Y Pb Pr) connection.
• [ RGB ] – for scart (TV OUT)
connection.
EN 29