Turn on Progressive Scan
Connect a progressive scan TV with
component video sockets (see chapter
'Connect video cables - Option 1: Connect to
component video sockets' for details).
Turn on the TV to the correct viewing
channel for this DVD player.
to select [ Video Setup ].
Select [ Component Video ] > [
Interlaced ], then press OK.
Select [ Progressive ] > [ On ], then press
A warning message is displayed.
To proceed, select [ OK ] and press OK.
The progressive setup is complete.
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press the numeric button '1'.
To exit the menu, press SETUP.
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
During play, when progressive scan mode is on for
both this DVD player and the TV, distorted picture
may display. Turn off the progressive scan feature on
both this DVD player and the TV.