White-Balance, Luminance Adjustment - HCL HCM9LWAN21 Service Manual

19"W LCD Color Monitor
9. White- Balance, Luminance Adjustment
Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
1. How to setting MEM channel you can reference to chroma 7120 user guide or simple use " SC" key and
" NEXT" Key to modify xyY value and use "ID" key to modify the TEXT description. Following is the procedure
to do white-balance adjust .
2. Setting the color temp. you want
A. MEM. (Warm color):
6500K color temp. parameter is x = 313 ±30, y = 329 ±30, Y>150cd/m
B. MEM. (Cool color):
7800K color temp. parameter is x = 296 ±30, y = 311 ±30, Y>150cd/m
C. MEM. (sRGB color):
sRGB color temp. parameter is x = 313 ±30, y = 329 ±30, Y>150cd/m
3. Into Factory mode.
Press the MENU button, pull out the power cord, and then plug the power cord. Then the factory OSD will be at the
left top of the panel.
4. Bias adjustment:
Set the Contrast to 50; Adjust the Brightness
5. Gain adjustment:
Move cursor to "-F-" and press MENU key
A. Adjust Warm (6500K) color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press "MODE" button)
2. Switch the MEM. channel to 6500K Channel(with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 ±30, y = 329 ±30, Y>150cd/m
4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100
6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2
B. Adjust Cool (7800K) color-temperature
1. Switch the Chroma-7120 to RGB-Mode (with press "MODE" button)
2. Switch the MEM. Channel to 7800K Channel(with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 296 ±30, y = 311 ±30, Y>150cd/m
4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100
5. Adjust the GREEN on factory window until chroma 7120 indicator reached the value G=100
6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100
7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2
C. Adjust sRGB color-temperature
1. Switch the chroma-7120 to RGB-Mode (with press "MODE" button)
2. Switch the MEM. channel to sRGB Channel(with up or down arrow on chroma 7120)
3. The LCD-indicator on chroma 7120 will show x = 313 ±30, y = 329 ±30, Y>150cd/m
2
2
2
to 80.
35
HCL HCM9LWAN21
2
2
2