Installing Ear Tip - welko InfiniEar ITE Nstruction Manual

Hearing amplifier
Table of Contents

Advertisement

CHARGING UP BY A 1.5V AA BATTERY (cont'd):
7. The green LED Charge Indicator lamp on the panel of the
Dual-Charger/Container will stop blinking once the device
is charged up and will remain lit in green until the device
(amplifier unit) is removed from the Dual-Charger/Container.
To charge up your Welko™ InfiniEar® ITE Rechargeable
Hearing Amplifier by the AA alkaline battery can take up to
four hours or so, and each charge should last 10 hours of
continuous use before the next recharging is needed. When
not using the device (amplifer unit) turn it off, this will help
save battery.
INSTALLING THE SILICONE RUBBER EAR TIP:
2. Place a silicone rubber ear tip on to the receiver end, with
its tip pointing downwards to the front end of the device.
Check that your ear tip is correctly put in. The diagram on
your right shows an incorrectly installed ear-tip.
Incorrect!
Correct.
- 15 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents