welko InfiniEar ITE Nstruction Manual page 13

CHARGING UP FROM A WALL OUTLET:
1. Before charging up make sure power of the device
(amplifier unit) is turned off. Follow Step #2 of HOW TO
TURN ON/OFF AND ADJUSTING VOLUME on Page 8 of this
manual to turn off.
2. Hold the device (amplifer unit) between your thumb and
index finger with its ear tip pointing downwards, place it
into the charging port of the Dual-Charger/Container.
3. Your Welko™ InfiniEar® ITE Rechargeable Hearing
Amplifier should come with an AC power adapter. To avoid
possible risk of electric shock, connect firstly the AC power
adapter jack to the charger socket, as shown below.
4. Once plugged the AC power adapter into a wall outlet,
slide the ON/OFF switch on the panel of the Dual-Charger/
Container to its ON position to activate the rechargeable
system, the green LED Charge Indicator lamp will blink three
times notifying you the rechargeable system is ready.
- 11 -