KYMCO K-ACTIV User Manual page 23

Note:
Do not remove the "24V output cable" before the
completion of charging. The life of the batteries may be
significantly reduced or even be damaged if the battery is
frequently used after inadequate charging. Please ensure
that the batteries are fully charged.
Do not interrupt the charging process before the batteries
are fully charged.
If the "24V output cable" is not removed when the
charging process is complete, the electricity will be slowly
consumed even if the power of the charger is cut off.
The batteries should be fully charged before use if the
Powerchair has not been turned on for a long time.
The time required for charging varies with the temperature
of environment: it is longer in winter than in summer.
Only the original KYMCO Healthcare charger should be
used and the batteries should be fully charged. Failure to
do so may cause damage to batteries.
Unauthorized
charger is prohibited.
Charge the batteries at a location with good ventilation. Do
not expose the charger to direct sunlight or places with
high humidity such as the presence of rain or dew.
Do not cover the Powerchair with raincoat or other
impermeable objects when charging.
Do not charge at a temperature lower than -10 °C or
higher than +50 °C or the charging efficiency is affected,
or even causes damage to the batteries.
Keep away from flammable objects when charging to avoid
the risk of fire or explosion.
Do not smoke during charging because the batteries
generate oxygen and hydrogen. Charge the batteries in a
well-ventilated area.
Do not plug in or remove the "24V output cable" and pin
connector of the charger with wet hands, or plug in or
remove these objects when they are wet because of the
risk of electric shock.
disassembling
20
and modification of the