How To Set The Menus - Mitsubishi Electric WL639U User Manual

Menu operation (continued)

How to set the menus:

Following describe how to set AUTO POWER OFF
time.
1. Press the MENU button.
opt.
IMAGE
COLOR
. Press the  or  button to select a menu to use.
ENHANCER
CONTRAST
opt.
BRIGHTNESS
INSTALLATION COLOR TEMP.
COLOR
3. Press the ENTER button (or  button).
WALL SCREEN
TINT
LAMP MODE
opt.
AUTO POWER
SHARPNESS
ON
ADVANCED MENU AUTO POWER
INSTALLATION
OFF
IMAGE
WALL SCREEN
CAPTURE
SPLASH
LAMP MODE
ON
SCREEN
Available settings in the menus
AUTO POWER
BACK COLOR
ON
Set the following items on their relevant menus.
AUTO POWER
MUTE MODE
OFF
IMAGE
IMAGE
1. IMAGE menu
REVERSE
CAPTURE
SPLASH
ON
SCREEN opt.
BACK COLOR
IMAGE
MUTE MODE
COLOR
IMAGE
ENHANCER
REVERSE
CONTRAST
BRIGHTNESS
COLOR TEMP. STANDARD
COLOR
TINT
SHARPNESS
ADVANCED MENU
ITEM
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
NOISE REDUCTION
CTI
INPUT LEVEL
AUTO
0
0
STANDARD
0
BEIGE
0
STANDARD
0
OFF
OK
OFF
SETUP
BEIGE
ON
STANDARD
BLUE
OFF
BLACK
OFF
OFF
SETUP
IMAGE - ADVANCED menu
ON
BLUE
IMAGE
BLACK
ADVANCED MENU
AUTO
OFF
NOISE REDUCTION
0
CTI
0
INPUT LEVEL
0
0
0
OK
SETTING
AUTO
PRESENTATION
STANDARD
THEATER
sRGB
USER
±30
±30
4 options
±10
±10
±5
ON / OFF
ON / OFF
±5
INSTALLATION
4. Press the  or  button to select an item to adjust.
KEYSTONE
AUTO POWER
ON
AUTO POWER
OFF
INSTALLATION
SPLASH SCREEN
ON
5. Set the selected item by pressing the  or  button.
KEYSTONE
BACK COLOR
AUTO POWER
ON
LAMP MODE
AUTO POWER
OFF
IMAGE REVERSE
SPLASH SCREEN
To cancel the menu:
ON
BACK COLOR
6. Press the MENU button several times.
LAMP MODE
Important:
IMAGE REVERSE
• When the MENU button doesn't function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with
ENTER button.
opt.
ON
ON
0
FUNCTION
Select to optimize the settings automatically depending on the input
signal. (Select this option for normal use.)
Select to make the displayed image look bright and crisp. Suitable mainly
for projecting computer signals in a well-lit conference room.
Select to make the displayed image look natural. Suitable for viewing
video images in a relatively bright room.
This option, suitable for viewing movies, makes the displayed image look
soft and smooth. Suitable for viewing movies in a dim room.
Select to give priority to the color reproducibility.
• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT
can't be adjusted.
Select to set the gamma curve or adjust the color intensity or color
balance as desired. (See page 9.)
Use to adjust the contrast of the projected image. (See page 8.)
Use to adjust the brightness of the projected image. (See page 8.)
Use to adjust the color temperature. (See page 9.)
• COLOR TEMP. is unavailable when WALL SCREEN in the INSTALLA-
TION menu is set to other than OFF.
Use to adjust the color thickness of the projected image. (See page 8.)
• When the COMPUTER1, COMPUTER or DVI is selected as the input
source, COLOR can't be adjusted.
Use to adjust the color tint of the projected image. (See page 8.)
• When the COMPUTER1, COMPUTER or DVI is selected as the input
source, TINT can't be adjusted.
• TINT is available only when the NTSC signal is input.
Use to adjust the sharpness of the projected image. (See page 8.)
Use to reduce noise and roughness in the image when noisy video signal
is input.
Use to correct smeared color boundaries.
The input level of video signal differs among devices to be connected.
High input level causes solid white in displayed image and low input level
causes displayed image to get dark. Use this menu to adjust the input
level of analog video signal.
EN-3
opt.
XGA60
AV MEMORY 1
0˚
OFF
opt.
XGA60
OFF
AV MEMORY 1
ON
0˚
BLUE
OFF
STANDARD
30min
OFF
ON
BLUE
STANDARD
OFF
, press the