Advertisement
1) LCD Backlight time
There are 4 kinds of time setting: 10s, 20s, 30s, 60s
2) Restore Factory Setting
This function is for fixture factory restoration. All the data will be initialized after operation:
7. Info Mode
This mode is information mode.
1) Product item number
2) Temperature control
Normal: Temperature control is normal
Warning! Error: Temperature control is abnormal
3) Version
NOTE
1. Press the "MODE" and "SETUP" at same time for a few seconds to restore factory settings, the data will be
initialized.
2. Be care with your operations. You endanger your own safety and others, please follow the operation in this
manual.
3. When the fixture operated in a environment temperature which is beyond the scope of parameter allows, if the
temperature is higher than allows, please reduce full power use time, to prevent overheating damage fixture.
4. When the fixture power on, if the display shows
, please check the cables inside the fixture.
5. Please do not operate when power on to avoid safety accident.
Advertisement
