Dialighting LED Par IP65 RGB User Manual page 3

Mode Switching
1. Built-in Program mode
There are 9 built-in program modes; You could press "UP" or "DOWN",
static color mode，press "UP" and "DOWN"
1)
2) Static color strobe setting
Press "SETUP" button enters to set the strobe speed, press "UP" and "DOWN" to change the value.
3) Other programs
Press "SETUP" button enters to set the speed and strobe.
2. Auto running
This mode is Auto Running mode; the fixture will automatically run the programs according to the preset program
~ .