Description Of Parts; Installation - LENCO BT-125 User Manual

Front View
1
1
1. Six wave field synthesis
(WFS) speakers
2. NFC sensor
3. FUNC. button
4. VOLUME + / - button
5. POWER
6. Status LED indicator
7. AC socket
8. USB connector
9. AUX-IN jack
10. PAIRING button
11. RESET button
12. Subwoofer
13. Bass Reflex Opening
AC Power Connection
(1) Connect the power cord plug to the AC socket located at rear of the unit.
(2) Firmly and securely plug the AC mains plug into AC mains outlet.

Description of parts

2 3 4
5
6
1
The NFC (Near Field Communication) sensor located
at middle top of the unit.
The function button, press to select Bluetooth® or
AUX-IN mode.
Adjust volume level up or down.
button Turn the unit on or off.
Power supply to the unit.
Power source DC 5V (1000mA) for charging mobile
device battery only.
Auxiliary audio signal input.
Press to enter Bluetooth® pairing mode.
For resetting the unit.
This opening should never be blocked otherwise the
bass effect will be reduced.

Installation

GB 4
Rear View
12 13
7 8 9 10 11