Safety Instruction; Accessories; Unit Description And Operation; Front Panel - LENCO PlayLink 4 Instruction Manual

LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL
Before Start

1. Safety Instruction

Be sure to read the user's manual before starting the operation of the product.
Never open any part of the product to prevent a possible electric shock. No naked
fame sources, such as lighted candles, should be placed on the apparatus.
Place the product in a well-ventlated and no-heat environment.
IMPORTANT: This product is not an outdoor product! Only for indoor use!
To clean the speaker, disconnect it from AC source. Only use a soft cloth, never use
any solvent. To maintain the speaker fabric, do not use a vacuum cleaner.
When you do not use the product for a long time, make sure that power cord is
pulled out from the outlet. Also do not use a damaged power cord as it may cause
fire or electric shock. Do not touch the AC line and AC connectors with wet hands
as if may cause electric shock.
Do not put the heavy items on the product. That may cause damages not
supported by the warranty.
Do not place the product in a position where it is exposed to moisture or water
hazards. NEVER place any water carrying vessels such as vase, etc... near the unit.
Moving the unit to a hot area from a cold one will cause condensation. If
condensation occurs, leave the product in a warm, well ventilated area and do not
operate it for 30 minutes or one hour or until it has dried completely.
If the unit broken accidentally, do not touch any parts with your hands. Ware
protect on clothes, put the parts in a bag and remit it to an electronic shop or a
special waste place to treat electronic used goods.
Disposal: All electrical and electronic products including batteries should be
disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.

2. Accessories

User Manual Quick Guide
Note: The other languages (DE/NL/ES/FR/IT/PT/SC) of the manual are available on the website : lencoplay.com.
For battery operation, please refer to page 13 for installation and usage.
2 - EN
AC adapter Battery PL4BAT (optional)
LENCO PLAYLINK-4 / PLAYLINK-4 with Battery INSTRUCTION MANUAL

3. Unit description and operation

Front panel

4
1
1. Speakers Sound output
2. Multi-
This indicator displays several colors versus the speaker mode or
status:
Function
LED
Permanently red: Stand-by mode. In this mode the power consump-
indicator tio is < 0.5W; no function is available and need one minute to make the
speaker operational when wake up it from this mode.
Note: keep pressed the power key during 5 seconds to go to
Stand-by mode.
Flashing red: a. Network sharing mode. This mode allow you to get
the minimal power consumption keeping your WiFi network function
activated.
b. Low Battery indication: When the battery becomes low, the LED is
flashing by group of 3 times to indicate the battery is low and need to
be charged.
Yellow: Flashing Yellow indicates the speaker is booting. Please wait
until the LED stop flashing yellow to get your speaker operational.
White: Wi-Fi mode:
In Wi-Fi mode, the indicator can take 4 different status below:
→ Flashing slow: Booting and Waiting connection
→ Flashing fast: Connecting
→ Permanently white: a. Connected to the home network;
b. Direct mode connection
Blue: Bluetooth mode (BT)
→ Flashing blue: Waiting for BT connection
→ Permanent blue: Connected
Green: Line-IN mode
Purple: Flashing purple indicates you adjust the maximum preset
volume
3. Power Key Press this key to Power-ON the box or go to Stand-By mode.
Note: When using the battery, if the battery is low you cannot wake up
the speaker, you need to connect the speaker to the AC adapter for it.
2
3
1
EN - 3