Mitsubishi LVP-X400BU User Manual page 34

The data code of CONTRAST and BRIGHTNESS is structured by the difference data of R from G, the main data and the difference
data of B from G.
[Example 2] Set the difference data of R from G to +10, the setting main data to 0 and the difference data
of B from to -5.
Sending commands
from the PC etc.
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'P' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
[Example 3] The TINT was set to +10 when the setting status was confirmed.
Sending commands
from the PC etc.
30 30 53 0D
'0' '0' 'S' ' '
8) Reading command diagram
Monitor projector operation status. The power ON, OFF and input terminal settings can be monitored.
POWER ON
POWER OFF
INPUT COMPUTER 1
INPUT COMPUTER 2
INPUT VIDEO 1
INPUT VIDEO 2
When a personal computer sends the command, data code will not be attached. However, the projector which has
received a command will attach the recent operating status and then send.
[Example ] Input was Video 1 when the operating status of the input terminal was confirmed.
Sending commands
from the PC etc.
30 30 76 49 OD
'0' '0' 'v' 'I' ' '
'
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'P' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
30 30 53 2B 31 30 0D
'0' '0' 'S' '+' '1' '0' '
ASCII
Function Data (Receive)
vP 1
vP 0
vI r1
vI r2
vI v1
vI v2
Status code from
projector
30 30 76 49 76 31 0D
'0' '0' 'v' 'I' 'v' '1' '
Status code from
projector
Status code from
projector
'
HEX
Function Data (Receive)
76h 50h 31h
76h 50h 30h
76h 49h 72h 31h
76h 49h 72h 32h
76h 49h 76h 31h
76h 49h 76h 32h
Command to confirm input
Command (Input is Video 1)
' carrired out
5
Meaning
Command for setting the
picture control
Command received
' (Command echo back)
Meaning
Command to confirm
setting of TINT
Command (setting of TINT
is +10) carried out
Meaning