Table of Contents
Advertisement
Basic connections
This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com-
puters having analog RGB output.
Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
• If connected units are set too close to one another, the image may be affected.
• Refer to the owner's guide of each component for details of connections.
Projector + AV equipment
Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, C
connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector. In this case, set " Y, C
INPUT setting in SIGNAL menu.
DVD player generally has SDTV system component
video output (Y, C
, C
) terminals. HDTV decoder has
B
R
HDTV system component video output (Y, P
minals. When connecting the projector with DVD
player or HDTV decoder, the signal cuircuit
automaticaly applied to either of them
the COMPUTER INPUT in the SIGNAL menu be-
comes [Y, C
, C
/Y, P
, P
B
R
B
• Y, P
, P
is an example of the terminal names for a HDTV decoder.
B
R
• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in
the SIGNAL setting menu.
• Change the setting in the SIGNAL menu, when 525p signal is inputted. (Refer to page 20).
• Set the INPUT SELECT switch on the terminal board to ANALOG. (For LVP-X400BU only)
EN – 10
USB
RS-232C
INPUT SELECT
COMPUTER 1 IN
AUDIO 1 IN
REMOTE
VIDEO 1
VIDEO 2
IN
IN
DIGITAL
ANALOG
COMPUTER 2 IN
S-VIDEO
AUDIO 2 IN
MAIN
VIDEO
O
I
COMPUTER OUT
AC IN
AUDIO OUT
L
AUDIO
R
VCR etc.
, P
B
R
In this case,
.
].
R
Connect either one of these.
to S-video input
to video input
to audio input
to video output
to audio output
to S-video output
, C
). When connecting them to the projector,
B
R
DVD player or HDTV decoder
) ter-
Y
C
(P
)
C
(P
)
B
B
R
R
No connection
HD/CS
G
B
R
Mini D-SUB 15 pin-BNC
conversion cable (optional)
, C
B
R
AUDIO cable
to COMPUTER
to AUDIO OUT
BNC - RCA connector
(optional)
VD
to COMPUTER
IN (Mini D-SUB
" for COMPUTER
AUDIO IN
USB
RS-232C
INPUT SELECT
COMPUTER 1 IN
REMOTE
AUDIO 1 IN
VIDEO 1
VIDEO 2
IN
IN
DIGITAL
ANALOG
COMPUTER 2 IN
S-VIDEO
AUDIO 2 IN
MAIN
VIDEO
O
I
COMPUTER OUT
AC IN
AUDIO OUT
L
AUDIO
R
15P)
Hide quick links:
Advertisement
Table of Contents
