Epson XP-410 Series User Manual page 113

User's Guide
Lights Problem and solution
Paper out
No paper is loaded.
Multiple-paper feed
More than one sheet has been fed at a time.
Paper jam
Paper has jammed in the product.
Ink expended
An ink cartridge is expended or not installed, or
there is insufficient ink in the cartridge to charge
the ink.
Wrong cartridge
The currently installed ink cartridge cannot be
used with the product.
You cannot use the cartridges that came with
your product for the replacement.
Incorrectly installed ink cartridge
An ink cartridge is not installed correctly.
Ink low
An ink cartridge is nearly expended.
Maintenance
The product's ink pads are nearing or at the end of
their service life.
Flashing
alternately
Error Indicators
Load paper into the sheet feeder, and then press one
of the start x buttons. The product resumes printing
and the light goes out.
Load paper in the sheet feeder correctly and press one
of the start x buttons. If the paper remains in the
product, see
"Paper Jams" on page 119
&
Replace the ink cartridge for which an error is
indicated with a new one. If the light is still on after you
have replaced the cartridge, it may not be installed
correctly. Reinstall the ink cartridge so that it clicks
into place.
"Replacing an Ink Cartridge" on page 86
&
Replace the incompatible cartridge for which an error
is indicated with an appropriate ink cartridge.
"Replacing an Ink Cartridge" on page 86
&
Reinsert the ink cartridge for which an error is
indicated.
"An ink error is indicated after you replace the
&
cartridge" on page 130
Obtain a replacement ink cartridge. To determine
which cartridge is nearly expended, check the ink
cartridge status.
"Checking the Ink Cartridge Status" on page 80
&
Contact Epson support to replace ink pads.
If the product's ink pads are nearing the end of their
service life, printing can be resumed by pressing one
of the start x buttons.
113
"Paper Jams" on page 119.