Sony Wega KE-MR50 Operating Instructions Manual page 22

Connecting optional components (continued)
22
Using Your New TV
Notes
• Some DVD player terminals may be labeled differently:
Connect
Y (green)
P /C (blue)
B B
P /C (red)
R R
• Connect nothing to the HD/VD jacks when connecting a DVD player to
COMPONENT VIDEO IN (component video input) 1 or 2 .
• If you select "HD/DVD 1" or "HD/DVD 2" on your TV screen (see page
28), sound will be heard but no picture will be output from T VIDEO
OUT (monitor output). This does not indicate a malfunction.
• When receiving a progressive signal through
IN (component video input) 1 or 2, "DRC-MF", "DRC Palette" and "Game
Mode" are not selectable.
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, display the "Picture" menu and
select "Personal" for "Picture Mode" (see page 82), then adjust the
sharpness ("Sharpness") under "Picture Adjustment" (see page 83).
• You can also connect a DVD player to t VIDEO IN (video input) 1, 2 or 3
jacks on the media receiver unit.
To (on the DVD player)
Y
C , B-Y or P
b B
C , R-Y or P
r R
COMPONENT VIDEO