Step 2 Connect The Antenna - Sony Wega KE-MR50 Operating Instructions Manual

Getting Started (continued)
Step 2
Connect the antenna
If you wish to connect a VCR, see the "Connect a VCR" diagram on page 15.
or
: Signal flow
14
Using Your New TV
To 8 VHF/UHF (antenna)
Antenna cable (supplied)
Antenna cable (supplied)
For optimum Performance
To connect the media receiver unit to the antenna or the VCR, use
an antenna cable (supplied).
Note that one end of the cable has a male plug fitted while the other
end is fitted with a female socket. Connect the male plug to the 8
VHF/UHF (antenna) terminal of the media receiver unit.
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
8
VHF/UHF
Rear of Media Receiver Unit
To 8 VHF/UHF (antenna)
8
VHF/UHF