Download Print this page

Narita NTK-007 Introduction Manual page 3

Advertisement

General Safety:
.
1. It is imperative that you select the correct voltage before using. Fejlure to do so will
damage kettle.
2. When in use, position the kettle on a firm, level surface, close to the power sOC:o(el
and out of reach of children.
3. Do not use in the bathroom or near any source of water or where any liquids are
present.
4. Do not place the kettle or the power cord on or near any hot surface (including hot
plates of burner) ..
5. Do not let the power cord hang over the edge of the work surface or touch hot
surfaces.
6. Do not allow children to use the kettle.
7. Even thought the kettle has the function with boil dry protection, but never use it
without water.
If the function of boil dry protection has turned off the kettle, please
let it cool down completely
before re-use.
8. The kettle must not be covered during use.
9. Do not pour anything while the kettle is switched on.
10. When cleaning the inside of the kettle, do not use a screwdriver
or fork or any items
of similarity as these may cause damage to the heating plate.
11.The kettle should not be moved or touches when in use. Do not leave the kettle
unattended when it is in the process of boiling water.
12. Always unplug the kettle from the power socket aHer use and let it cool completely
before cleaning and storing it.
13.Remove the water scale from the kettle frequently, as large build up of scale may
affect performance
and reduce the life span of the heating plate.
14. When cleaning, never let the cord come in contact with water or any other liquids.
15.The kettle is only made for boiling water; heating milk or other liquids may damage
the kettle.
WARNING:
THE APPLIANCE
MUST BE EARTHED
Do not operate the kettle with a damaged power cord or plug. If it is damaged, return it
to our service department for repair. This kettle is for household use only. Do not use
outdoors.
The attached
plug is for use in United
States,
dual voltage
for world
wide use
(some
countries
may need a plug adapter).

Advertisement

loading