Flash Compensation
Flash compensation is used to alter flash output by from –3EV to
+1EV in increments of
main subject relative to the background. Flash output can be
increased to make the main subject appear brighter, or reduced
to prevent unwanted highlights or reflections.
Press the M (Y) button and
rotate the sub-command dial
until the desired value is
displayed. In general, choose
positive values to make the
main subject brighter, negative
values to make it darker.
Control panel
±0 EV
A
Live View
In live view, the selected value is displayed in the monitor.
(P, S, A, M, and SCENE Modes Only)
/
EV, changing the brightness of the
1
3
M (Y) button
Information display
/
1
–0.3 (–
) EV
3
Sub-command
dial
+1.0 EV
151