Mouse Remote Control - Mitsubishi XL2 User Manual

Mouse remote control

By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the
projector remote control.
Connection
Projector + PC with USB connector
• You can use the mouse remote control function with computer supported USB only.
• When the lamp is turned ON, the computer connected with the USB cable may not work correctly. In this
case, restart the projector and the computer. If possible, you should disconnect the USB cable when the lamp
is turned ON.
Projector + PC with PS/2 connector
to mouse
(PS/2) port
• Turn off PC and the projector before connecting with PS/2 port. When connecting the PC with the projector
when the personal computer is on, the remote control does not work as a mouse. In that case, turn the projec-
tor on, then restart the personal computer.
• When the projector is connected with USB terminal and RS-232C terminal at the same time, only the termi-
nal which the projector recognizes first will work.
• When you use the RS-232C cable together with an extension cable, the function may not work correctly.
Operation
mouse pointer
Use to move the cursor on the image,
instead of the computer mouse.
to USB port
USB cable
USB 4P
(type A)
PS/2 adaptor
Mini DIN 6P D-SUB 9P D-SUB 9P
COMPUTER
KEYSTONE VIDEO
1 2
EXPAND P in P AUTO POSITION
VOLUME LASER
– +
ENTER
MENU R-CLICK
MUTE STILL 16 : 9
to USB
RS-232C
COMPUTER IN
USB
COMPUTER OUT
USB 4P
(type B)
RS-232C cable
Mini DIN 8P
left click
This operates in the same
way as the left button on
the computer mouse.
R-CLICK
This operates in the same way as the right
button on the computer mouse.
S-VIDEO
MAIN
L
R
VIDEO
AC IN
AUDIO IN VIDEO IN
to RS-232C
terminal
S-VIDEO
RS-232C
MAIN
L
COMPUTER IN
R
USB
VIDEO
AC IN
AUDIO IN VIDEO IN
COMPUTER OUT
EN – 21