Alarm Am/Pm Setting; Choosing The Alarm Sound; Alarm Reminder; Setting The Time - RNIB CC36 Instructions Manual

alarm minutes will advance in five minute blocks (five, ten, and so
on) until the button is released.

Alarm am/pm setting

The next mode announces "alarm" followed by the current alarm
am/pm setting. Toggle this setting between am and pm by pressing
the Set button.

Choosing the alarm sound

In the next mode the clock says "alarm" followed by the default
alarm sound. Choose from the following alarm sounds: a two-tone
alarm, a mechanical bell sound, a horn sound, a cuckoo and a
beeping alarm by pressing the Set button.

Alarm reminder

The clock's alarm will sound for one minute at the time set and will
then pause for four and a quarter minutes. This process will be
repeated five times and then stop, unless you cancel it by pressing
the Talk button on the top of the clock.

Setting the time

Press the Mode button until the clock says "clock hour" followed by
the current clock hour setting. Use the Set button to advance the
hours. Press Mode to move to setting the minutes, whereupon the
clock says "clock minute" and the current clock minute setting.
Change this with the Set button. To advance the minutes quickly
press and hold the Set button and the minutes will advance in five
minute blocks until the button is released.

Clock am/pm setting

In the next mode the clock says "clock" then the current am/pm
setting. Change this by pressing the Set button. Pressing the
Mode button once more will return the clock to the current time
announcement mode which can also be used to confirm your time
setting.
rnib.org.uk