Power and Grounding Specifications
Use DC24V as PV037 power input. The power consumptions are as following
table. To ensure the PV037/PV057 hardware working properly, to avoid outside
electromagnetism noise, please ground the power source properly.
Items / Models
Power
consumption
Fuse Rating
Power grounding caution: The products are all equipped with power terminals
and lock assemble sets.
Operating procedure:
Screw off the power terminal.
Peel the 24V wiring(1.25mm) for 1 cm then plug in the power terminal.
Use line screw driver to screw the power terminal tight.
Package content
We are appreciated for your purchasing our products. Our standard package
should be equipped with 5 items as following. Please check after receiving it. If
there's any shortage, please refer to the supplier.
PV037/PV057 unit
Power terminal x 1 (power terminal)
Communication terminal x 1 (4-pin communication connector)
Installation screw nuts x 4 (Lock for assemble with screws)
PV037/PV057 Installation Guide x 1 (Installation manual)
King View
PV037-LSK
PV037-LST
24VDC±10%; 6W
0.5A
x 1 (PV037/PV057 HMI Hardware)
PV
PV057-BST
PV057-TST
24VDC±10%; 10W
0.8A
A-15