Advertisement
The Advanced
Features
Menu, continued
Advanced
Convergence
Before you can adjust theAd-
vanced Convergence,
you must
adjust the Static Convergence
for
both Red and Blue.
I.
PressA ),V or • to move the flashing bracket to a
position that needs adjustment.
Press
E_R tO
stop the flashing and begin the adjustment.
2. Press • I_v or • to move the red or blue line. A
position is converged when all three lines combine
to make a white line,
ENTER
3. Press _
when aligned and the bracket will flash
again. You may now repeat steps I-3 until you are
satisfied with the grid alignment.
VIDEO
4.
Press _
to alternate between red and blue.
MENU
5. To exit, press O
to return
to the previous
menu
HOME
or O
to return to television viewing.
IMPORTANT
There
are more
than 64 line
intersections.
However,
the
bracket
will only stop on the 64
adjustment
positions.
Resetting
the Factory
Defaults
L
Z
.
5.
MENU
Press _
to display the Main Menu.
Press • or • to select Advanced
Features.
Press E_R.
ENTER
PressAor•
to select Convergence.
Press _.
PressA or • to select Reset Factory
Default.
PressE_ R. The message "Convergence
reset
completed" will display when the defaults are
reset-
MENU
To exit, press _
to return to the previous menu
HOME
....
or _
to
return
to
televms_on
viewing.
44
Advertisement
