Technical Specifications Pro-Ject Dac Box E; Service; Warranty; Copyright, Trademarks - Pro-Ject Audio Systems DAC Box E Instructions For Use

Technical specifications Pro-Ject DAC Box E

Line-level output:
Output voltage:
Digital outputs:
D/A converter:
Supported audio format:
Sampling rates
Optical and coaxial input:
Outboard power supply:
Power consumption:
Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mm
Weight:

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Copyright, trademarks

Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2014. All rights reserved.
®
TOSlink is a registered trademark of Toshiba corporation. Dolby
Laboratories. DTS ™ is a registered trademark of DTS, Inc..
1 pair RCA/phono sockets
0,7Vrms
1 x coaxial (S/PDIF),
1 x optical (TOSlink ® )
Cirrus Logic CS4344. 24Bit/192kHz
PCM (LPCM). No support for multi channel formats like Dolby
44,1kHz, 48kHz, 96kHz and 192kHz (coaxial)
18V/500mA DC
200mA DC, <1W in standby
250g without power supply
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
© Pro-Ject Audio Systems · Pro-Ject DAC Box E · Revision 2014.4.10
®
is a registered trademarks of Dolby
® AC-3 or DTS ™
3