Mitsubishi WS-73909 Owner's Manual page 32

Part II: Installation
The NetCommand™ Setup: Edit Setup Screens
Bearing in mind that your home theater
system will continually change as you add
and remove components, Mitsubishi's Net-
Command also offers ease of use when it
comes to editing your home theater con g u-
ration.
Edit Setup Screen
Figure 1
When you need to make a change to your
current setup, the Edit Setup Screen makes
it easy. Possible choices, although not
always available, are Add, Change, Delete,
Review, or Initial.
Add
Figure 2
When you select Add from the Edit Screen,
you will see the New Device Screen. Select
the Device Type that you would like to add.
Next, you will name the device and select
the inputs for the TV and A/V Receiver.
Change
Figure 3
When you select Change from the Edit
Screen, the Change Screen appears. You
will need to select the device that you would
like to change by device name. Use this
to change the name or input connections to
the TV and A/V Receiver for a device added
through Initial Setup.
After selecting Next> from the Device
or Change screen, submenus for the
selected device will be displayed. These
submenus are explained on pages 34-35.
32
32
Figure 1. Edit Setup menu.
Figure 2. New Device menu.
Figure 3. Change menu.