Mitsubishi WS-73909 Owner's Manual page 28

Part II: Installation
The NetCommand™ Setup: Setup Screens
When you rst tu r n on your n ew Mi ts ubi s hi
TV, the Initial Setup Screens will appear.
You will need to navigate through these
screens and properly setup the equipment
connected to the TV in order to use NetCom-
mand.
Language Screen
Figure 1
The Language Screen is the rst s cr e en
displayed. You will need to select the lan-
guage that you would like to use. When
you change your selection from English to
Spanish, all setup screens and menus will
be displayed in Spanish.
Con g ur at io n Sc r een
Figure 2
The Con g ur a t io n Sc r e en al lo ws you t o
select which of the six con g ur a t io ns pr o -
vided with this book you will use when con-
necting your equipmernt. You will need to
choose the con g ur a t io n t h at is cl o sest to
your current home theater setup. If you use
one of the six pre-con g ur e d set u ps, th e Ne t -
Command™ Setup will automatically set the
devices with default inputs, names and A/V
settings matching the selected con g ur a t io n.
All you will need to supply is the manufac-
turer and model of your devices. You can
later edit, delete or rename each device or
add new devices.
Of course, the NetCommand™ Setup allows
you to create a custom con g ur a t io n i f y ou
would like. If you choose not to use NetCom-
mand, the NetCommand™ Setup will disap-
pear and you will be able to use the TV in a
similar method as traditional TVs.
28
28
Figure 1. Setup-Language menu.
Figure 2. Con g ur a t io n m e nu.