Turbo Function; Troubleshooting - Speed Link Cougar Pro SL-6631 User Manual

4. Notes on use
To test all of the Joystick's functions, do the following:
1. Connect the joystick to the USB port of your PC.
2. In Windows, open "Start/Control panel/System".
3. Double click on "Game controllers" ("Sound, video and game controllers"
under Windows Me) to display a context menu.
4. In the context menu, your joystick should be listed.
5. Click on properties to test operation of the buttons, axes, throttle
control of the joystick.
6. Click on the "Effects" tab to test the vibration function of your joystick.
You can calibrate the joystick via the "Adjustment" tab
7. If all functions work to your satisfaction, click on "OK" to exit the menu.

5. Turbo function

To assign the turbo function to buttons, proceed as follows:
1. Click on "Start/Settings/Control panel/Game controller (Gaming options
under Windows Me) and double click on your joystick (the joystick must be
connected)
2. Select the "Test" tab and click on "Turbo".
3. Select one or several buttons to which the turbo function is to be assigned.
4. To clear the assignment, click on "Turbo" again and then on "Clear".
6. Vibration function
Note that the game must support vibration effects to be able to use this function.
Vibration can be switched on/off manually with the switch on the bottom of the
joystick.

Troubleshooting

The joystick does not work even though it is correctly connected.
1. Make sure your joystick is listed in the game controller menu.
Under Windows XP , the entry appears under "Game controllers/ Extended",
select the device there and confirm with "OK".
2. If necessary, uninstall other installed game controllers, restart the PC,
and install the supplied software again.
7
D
GB
F
E
I