Advertisement
Adjustments
in the Service mode
(1) Receive the monochrome
circular pattern.
(Set the brightness to normal and contrast to maximum.)
(2) Set the TV receiver to the service mode.
(3) Select "03. V- L" by pressing Prog. UP/DOWN key.
(4) Adjust the vertical linearity by pressing LEVEL
(-~+)
key
(1) Receive the monochrome
pattern.
(Set the brightness to normal and contrast to maximum.)
(2) Set the TV receiver to the service mode.
.
(3) Select "06. H-W
by pressing Prog. UP/DOWN key.
(4) Adjust the horizontal width by pressing LEVEL (-~+)
key,
(1) Receive the grid pattern.
(Set the brightness to normal and contrast to maximum.)
(2)
Set the TV receiver to the service mode.
(3)
Select
"07.
P - W "(Parabola
width)
by pressing
Prog.
UP/DOWN key.
(4) Adjust so that the vertical line is straight by pressing LEVEL
(-~
+ ) key.
Parabola width
adjustment
(5) Select "08. C - P " (Corner
parabola)
by pressing
Prog.
UP/DOWN key.
(6) Adjust so that the vertical line is straight by pressing LEVEL
(-~
+ ) key.
Corner parabola
adjustment
Adjustments marked with an asterisk ( X ) in
the summary display are difficult to adjust
visually, so be sure to reset using the displayed
data only
if the setting
differs
from that
displayed.
(1) Receive the monochrome
circular pattern.
(Set the brightness
and contrast to normal.)
(2) Set the TV receiver to the service mode.
(3) Select"1 8.OSD 05" by pressing Prog. UP/DOWN key.
(4) Adjust so that the tuning bar center is optimum
position by
pressing LEVEL (- ~ + ) key.
–lo-
Advertisement
