Mitsubishi Electric LT-3050 Owner's Manual page 44

V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode
MAIN MENU
V-CHIP LOCK MENU
V-CHIP LOCK
To go to the menu,
enter a new passcode.
- - - -
Use the NUMBER buttons,
then press ENTER
Figure 27. First time entry to the V-CHIP LOCK
V-CHIP LOCK MENU
V-CHIP LOCK
To go to the menu,
enter your passcode.
- - - -
Use the NUMBER buttons,
then press ENTER.
Figure 28. Re-entry to the V-CHIP LOCK
44
LT3050_OG_v5.ind
MAIN MENU
44
Setting Up the V-CHIP LOCK
Passcode
(Figure 27)
Select V-CHIP LOCK from the MAIN menu
for first time setup or after you have canceled your
passcode. You will see the screen shown in Figure
27. Use the number buttons on the remote control to
input a new four-digit passcode, then press ENTER.
Before pressing ENTER, you can delete a character
and move back one character by pressing CANCEL,
or leave the passcode screen by pressing MENU or
HOME.
Entering the Passcode
(Figure 28)
Input your passcode as shown in Figure 28 (Note:
Text changes from "a new" to "your" passcode) the
next time you select V-CHIP LOCK from the
MAIN menu, you will see this screen.
If you forget your four-digit passcode, see Appendix A,
page 57.
04.1.23, 11:45 AM