Mitsubishi Electric LT-3050 Owner's Manual page 28

Mitsubishi lcd television owner's guide
Hide thumbs Also See for LT-3050:
Table of Contents

Advertisement

Use of the Remote Control with Other A/V Products
�������������
���
��
��
��
��� ������ �����
������� �����
����������
���
���
���
���������
���
�������
���� ���� ���
������� ���
���
�������
���
����
���
�������
���
�� ����� �� ������� ����� ����� ���
Figure 4. Programming the remote to control your
DVD or LDP.
�������������
���
��
��
��
��� �������� �����
����� �����
���� �� ������
���������� ��� ��������
���� ���� ���� ����
������ �� ������
���� ���
���� ���� ���� ����
�����
���� ���
������ ������
���� ���� ���
���
���� ���
�������
���� ���
�������
���� ���
�����
���� ���� ���� ���
�������
���� ���
����
���� ���
��������
���� ���� ���
������
���� ���� ���� ���
�� ����� �� ������� ����� ����� ���
Figure 5. Programming the remote to control your
A/V receiver.
If the slide switch is set to TV when you enter an A/V
receiver code, VOLUME and MUTE will control
the A/V receiver rather than the TV. To return
volume and mute control to the TV, set the slide
switch to TV, press and hold POWER and enter 000.
28
LT3050_OG_v5.ind
���
�����
�����
��
���� �� ������
�� ����
���
���� �� ���
������ �����
������ ���
���� ��
��� �
��������
��������
���
�����
��
�����
�� ����
�����
���� �� ���
������ �����
������ ���
���� ��
��� �
��������
��������
28
After entering the correct codes in each position of the
remote control, use the slide switch to select which
product will respond when an operational button is
pressed. If you enter a code from the AUDIO chart
while the slide switch is set to TV, the volume and
mute functions change to match the A/V receiver.
This is useful when using an A/V receiver with the
TV all the time. In all other cases, only one of the
below devices is allowed for each slide switch position.
TV position:
TV
A/V receiver (volume and mute only)
Cable/DBS/DTV position:
Cable box
Satellite receiver
DTV receiver
VCR position:
VCR
DVD position:
DVD
LD Player
Audio position:
A/V receiver
Mitsubishi CD player
If you have a Mitsubishi A/V receiver, the audio position
may be used in conjunction with select Mitsubishi CD
players. Your audio position must be programmed to
either 010 or 011. Plug the CD player power cord into a
switched outlet on the back of your A/V receiver. Pressing
the POWER button turns On the A/V receiver, along
with the CD player. In the audio position, for some
CD players, the transport controls (FF, Play, Rew, etc.)
operate the CD player.
Some manufacturers may change their products, or
they may use more than one remote control system.
If this is the case, your remote control may not be
able to operate your VCR, DVD, cable box, satellite
receiver, or A/V receiver.
04.1.23, 11:44 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents