Af Area Selection Modes - Canon EOS Rebel T6i Basic Instruction Manual

AF Area Selection ModesK
Single-point AF (Manual Selection)
h
Zone AF (Manual Selection of Zone)
q
The 19 AF points are divided into five zones for focusing. All the AF
points in the selected zone are used for the automatic selection of the
focusing point(s). It is effective for moving subjects.
However, since it is inclined to focus the nearest subject, focusing a
specific target is harder than with single-point AF.
The AF point(s) achieving focus is displayed as <S>.
19-point Automatic Selection AF
r
All the AF points are used to focus. This mode is set automatically in
Basic Zone modes (except <x>).
96
Select one AF point <S> to be used for focusing.
With One-Shot AF, pressing the shutter button
halfway will display the AF point(s) <S> that
achieved focus. If multiple AF points are displayed,
it means they all have achieved focus.
With AI Servo AF, the manually-selected (p.95) AF
point <S> is used first to achieve focus. The AF
point(s) achieving focus is displayed as <S>.