Saving Images - Canon EOS Rebel T6i Basic Instruction Manual

Saving Images

This section explains how to connect the camera and Connect Station
(sold separately) via a wireless LAN. To save images in other ways,
refer to the Connect Station instruction manual.
Set up the camera to allow use of its NFC function in advance (p.W-

20).
NFC connect point
W-44
Set up the camera to allow use of
1
its NFC function
Hold the camera close to the
2
Connect Station.
Turn on the camera and Connect

Station, then hold the camera's p
mark close to the Connect Station's
NFC connect point.

A message indicating the connection
is displayed on the camera's LCD
monitor.
When a connection is established,

Connect Station checks the images
on the memory card, then saves only
the unsaved images.
 The camera's <k> lamp will light up
in blue.
Terminate the connection.
3
After images are saved, the screen

on the left will appear on the camera's
LCD monitor. Press <0> to
terminate the connection.
.
(p.W-20)