Advertisement
MITSUBISHI IP (Security Products)
a valid IP address (greater than 255). Therefore you need to change the second digit
the number "9" first.
Step 3. Once all changes have been made, press the SETUP Button for about 2 seconds to
APPLY the new changes. The unit will Turn-Off and back ON. The DVR will come-up
in its ready state. No other changes are needed at this time
Configure the computer
2.
The following example is based on the Windows 2000 operating system. Other operating systems such as
UNIX, Linux, Macintosh, Windows XP, NT, Me, 98, 95 etc. should have the same capabilities but in a
different formats. Please consult your operating system's manual.
Connect a CAT 5 network cable to the OfficePortal 1800 HW .
Turn on the OfficePortal 1800 HW
Turn on the computer.
From the Windows Desktop, select
:
Start
Settings
Control Panel
Right click
"Local Area
Network and Dial-up connections
Connection", select "Properties"
4
Internet Protocol (TCP/IP)
select
If you don't see this option then you can
click the "Install..." button below, then
"Protocol"
"Add..."
Internet Protocol(TCP/IP)
Properties
Then select
"Microsoft"
Advertisement
