Luxor TSBT 100 Instruction Manual page 20

OPERATION
AUX INPUT:
1. Connect the included AUX cable to the Audio input (21)
on the back of the speaker. Connect the other end to the
audio source.
2. Set the mode to AUX by pressing the 'Input' (5) button until
the AUX indicator (2) illuminates in blue and the speaker
says 'Music'.
3. Start playing music from the connected device. Control the
music via your audio source and control the volume via
the audio source or the Main volume control (16) on the
speaker.
Note: If you use a phone as audio source and receive a
phone call during playback, the phone call will not be
played through the speaker.
4. To disconnect the AUX connected source, change the
audio input of the speaker. You can also turn off the
playback on your audio source and disconnect the AUX
cable from the AUX in port.
USB CHARGE PORT (5 V, 500 MA):
´ Connect the USB cable of your mobile device to the USB
port on the top panel of the speaker, and charge the
battery of your mobile device.
20 | ENGLISH
GUITAR INPUT AND MICROPHONE INPUT:
1. Connect the plug of the guitar cable to the Guitar input (9),
and/or the plug of the microphone cable to Mic in (14) to
use the speaker as an amplifier.
2. You can play music via any of the audio inputs (Bluetooth,
AUX) while using the speaker as an amplifier for your
guitar/microphone.
Note: There is a microphone priority function switch
(Karaoke On/Off, 13). When a microphone is inserted to
the Mic in jack (14), you can press this button to reduce
the music volume and highlight the vocals when talking/
singing by Mic.
3. Control the volume of the guitar with the Guitar volume
control (10), and the volume of the microphone with the
Mic volume control (12).