Luxor TSBT 100 Instruction Manual page 19

OPERATION
BUTTONS:
Button Description
Press to turn on or off the main
power (must be on for both 230 V
and Battery/12 V power).
Set to '230 V' if you want to power
the speaker via a wall outlet.
Set to 'Battery/12 V' to power the
speaker via either battery or a
12 V source.
BLUETOOTH INPUT:
1. Press the 'Input' (5) button until the Bluetooth indicator (4)
flashes in blue. The speaker goes into pairing mode.
2. Turn on the Bluetooth function on your mobile device.
3. Search and select 'TSBT 100' to pair. If your mobile device
requires a password to pair, enter '0000'.
Note: If your mobile device cannot find the speaker, restart
the Bluetooth function in the device.
4. After a successful pairing, the speaker will say 'Bluetooth is
connected' and the Bluetooth indicator (4) will illuminate in
blue.
Note: If you use a phone as an audio source and receive
a phone call during playback, the phone call will not be
played through the speaker.
Note: If the Bluetooth connection becomes weak during
operation, the speaker will automatically try to re-connect to
your mobile device.
5. Control the playback and the volume via your connected
mobile device and the buttons (6, 7, 8) and Main volume
control (16) on the speaker.
6. To disconnect the speaker from your mobile device, turn off
its Bluetooth function.
Note: The speaker will automatically re-connect to the latest
connected mobile device once it is started again. If you
want the speaker to connect to a different unit, turn off the
Bluetooth function on the previously connected device.
ENGLISH | 19