TechniSat MultyMedia TS 1 Operating Manual
  1. Manuals
  2. Brands
  3. TechniSat Manuals
  4. Media Player
  5. MultyMedia TS 1
  6. Operating manual
TechniSat MultyMedia TS 1 Operating Manual

TechniSat MultyMedia TS 1 Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BED_AN_Multymedia_TS1 2Q4eng
29.03.2006
10:40 Uhr
Seite 1
Bedienungsanleitung
MultyMedia TS 1
Operating Manual
with integrated
CONAX decoding system and
PCMCIA slot for
insertion of a CI module.
For reception of free-to-air and encrypted
(e.g. CONAX, CRYPTOWORKS, VIACCESS,
IRDETO, SECA etc.)
satellite and DVB-T programmes.
Features motor antenna controls and
software update via satellite / antenna.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultyMedia TS 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TechniSat MultyMedia TS 1

Summary of Contents for TechniSat MultyMedia TS 1

  • Page 1 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:40 Uhr Seite 1 Bedienungsanleitung MultyMedia TS 1 Operating Manual with integrated CONAX decoding system and PCMCIA slot for insertion of a CI module. For reception of free-to-air and encrypted (e.g. CONAX, CRYPTOWORKS, VIACCESS, IRDETO, SECA etc.) satellite and DVB-T programmes.

  • Page 2: Table Of Contents

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:40 Uhr Seite 2 1 Contents Contents ......2, 5 Illustrations ......3 Important notes on operation .
  • Page 3 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:40 Uhr Seite 3 7.2.5 Infobox ........28 Receiving encrypted programmes .
  • Page 4 Your receiver bears the CE symbol and complies with all requisite EU stan- dards. Not responsible for printing errors. Subject to change without notice. Correct as at 03/06 TechniSat and MultyMedia TS 1 are registered trademarks of TechniSat Digital GmbH Postfach 560 D-54541 Daun/ Germany www.technisat.de...

  • Page 5: Illustrations

    By changing/switching the remote control option, you can use this remote control unit to Durch Umschalten der Fernbedienoption können mit dieser Fernbedienung zwei Receiver, control two TechniSat receivers and a TechniSat television set using the same coding ein Fernsehgerät sowie ein weiters Gerät mit gleicher Codierung bedient werden.
  • Page 6 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 6 LED display Programm selec- On/Stand-by tor up/down Card reader for CONAX Smartcard: > Insert the CONAX Smartcard (with the gold chip pointed down and in the direction of insertion) carefully into the card reader as far as is possible.
  • Page 7 For this reason you should occa- sionally visit the TechniSat homepage, to download the current version of the operating manual. We wish you many years of viewing pleasure with your...

  • Page 8: Important Notes On Operation

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 8 3 Please read this first > Before starting to use your receiver, please check that all the components have been supplied correctly. The follo- wing should be included: 1 digital receiver, 1 mains adapterr and connection cable, 1 remote control, 1 operating manual, 1 guarantee card, 2 batteries (1,5V microcells) 1 SCART cable.
  • Page 9 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 9 Please ensure that spent batteries removed from the remote con- trol are not disposed of in your regular household refuse, but are correctly disposed either in special bins for problem waste, or at collection points in the retail trade.

  • Page 10: Connecting The Dvb Receiver

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 10 4 Connecting the DVB receiver a. Connecting the LNB with the LNB input (LNB IN) of the DVB receiver. b. Connection of the terrestrial antenna input with the DVB-T antenna. c. Scart connection of the DVB receiver with the television set.

  • Page 11: External Unit

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 11 The following references a b c etc. refer to the illustration on page 10. 4.1 External unit Use a suitable co-axial cable to connect the LNB input of the digital receiver with the LNB of your external unit.

  • Page 12: Hi-Fi Amplifier

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 12 4.5 Hi-fi amplifier 4.5.1 Analogue To achieve the best possible sound quality, you can connect your digital receiver to a hi-fi amplifier. To do this, use a suitable cable to connect the cinch sockets Audio R and Audio L of the digital receiver with an input of your hi-fi amplifier (e.g.

  • Page 13: Operating Language

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 13 You can interrupt the initial installation by pressing the red function key in the starting window of the installation assi- stant. In the following steps of the installation, you can then confirm the settings made by pressing the green function key;...
  • Page 14 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 14 Antenna configuration (DVB-S) If in your selection of signal sources you have selected Yes for DVB-S signals, this installation step will allow you to adjust the configuration of your digital receiver to that of your satellite antenna.
  • Page 15 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 15 Position B/Option A > Use the arrow keys up/down to mark the satellite you wish to receive with the DiSEqC setting Position B/Option A and confirm by pressing OK. (Fig. 5-7) Position A/Option B >...
  • Page 16 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 16 Programme search/scan/ ISIPRO The receiver will check whether a new ISIPRO program- me list is available for downloading. If a new programme list is available, this can be installed with the aid of the ISIPRO function.
  • Page 17 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 17 Loading SFI data our digital receiver features an electronic programme guide (EPG) called SFI (SiehFern Info). For the data of this electro- nic programme guide to be displayed, you must first downlo- ad the SFI data. When you have completed the update of your programme list, resp.

  • Page 18: Basic Settings

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 18 6.2 Basic settings To make the optimum use of your DVB receiver, you can still make a number of settings in line with your personal prefe- rences. > Press the Menu key to call up the Main Menu. >...

  • Page 19: Stand-By Clock

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 19 > If you wish to change the remote control from one receiver to the other while in operation, again press the SAT1 rssp. the SAT2 key and the OK key simul- taneously, 6.2.4 Stand-by clock In this line you can decide whether the current time is to be shown in the display while the receiver is in stand-by mode.

  • Page 20: Picture Format

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 20 When selecting a menu item, please also note any messages displayed on screen. The following settings can be made: 6.3.1 Picture format > Use the arrow keys left/right to set the picture for- mat of your TV set appropriately, to 4:3 or 16:9.

  • Page 21: Dolby Digital (Ac3)

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 21 6.3.6 Dolby Digital (AC3) Various movies are broadcast in Dolby Digital format. This will be indicated in the info window after the programme has been selected by the Dolby symbol If you have a Dolby Digital 5.1-channel amplifier, you can, where broadcast, enjoy appropriate movies in 5.1-channel Dolby Digital sound.

  • Page 22: Multytenna

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 22 > Use the arrow keys up/down to mark the line Settings. > Confirm by pressing OK. The menu Settings will be displayed. (Fig. 6-8) > Now use the arrow keys up/down to mark the line Antenna settings (DVB-S).

  • Page 23: Additional Settings/Lnb Characteristics

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 23 > Press the OK key. Example: A selection table listing various satellites will now be displayed. > Use the arrow keys to mark the desired satellite. Use the arrow keys up/down to move the marker up or down one line at a time, or use the arrow keys left/right to move the market backward or for- ward one page at a time.
  • Page 24 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 24 Test Transponder The following points of this menu need only be entered if you wish to check a satellite signal of a specific satellite. Transponder frequency > In this line, use the numeric keys to enter a frequency on which digital programmes are broadcast.

  • Page 25: Rotating Antenna Unit

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 25 Signal level/quality If you have entered the details of the test transponder correctly, the signal strength and quality will be indicated in these lines. > Press the red function key Back to go back to the setting of switching positions.

  • Page 26: Operation

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 26 > In this line, use the arrow keys left/right to switch the antenna feed on or off. In case of an overload or a short circuit, the antenna feed will be switched off automatically. In this case you should fix the problem, and then switch on the antenna feed again.

  • Page 27: Calling Up Blocked Programmes

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 27 Radio mode only radio programmes. The programme currently selected will be marked. (Fig. 7-1) > Now use the arrow keys up/down to mark the desired programme. > Press the OK key and the marked programme will be selected.

  • Page 28: Infobox

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 28 7.2.5 Infobox Each time you change programmes, an information box (Fig. 7-5) will be displayed briefly, showing the programme slot and the programme name of the programme selected. In addition, (Fig. 7-5) other programme properties will be indicated, such as Videotext, for a 16:9 format broadcast, for encrypted...

  • Page 29: Conax Pin Code

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 29 event (Formula 1) or to switch to different sporty venues (National League football in Germany). Where a programme provides multifeed options, this will be indicated by a message on screen (Fig. 7-6). (Fig. 7-6) >...

  • Page 30: Volume Control

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 30 gramme will be unblocked, and can be viewed. If the PIN code is entered incorrectly, you can either enter it again, or press the Back key to return to the programme previously selected. 7.4 Volume control You have the facility to adjust the volume of your digital recei- ver.

  • Page 31: Dolby Digital (Ac3 Mode)

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 31 7.6.1 Dolby Digital (AC3 mode) If a programme is being broadcast in Dolby Digital Sound, this will be indicated when you switch to the programme, as the Dolby logo will be displayed in the Infobox. Provided you have enabled the Dolby Digital (AC3) function in accordance with Point 6.3.6, the programme will automatically be repro- duced in this sound format.

  • Page 32: Transponder Information

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 32 > Press the Info key twice to open an additional infor- mation window (Fig. 7-13). Additional information relating to the current program- me will be displayed. > You can move around lengthy information texts one (Fig.
  • Page 33 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 33 such as an overlapping of videotext contents and picture, you should set your digital receiver to FBAS mode (Point 6.3.4). 7.13.2 Using the internal videotext decoder As an alternative, you can also use the integrated TOP video- text decoder to display the information.

  • Page 34: Sub-Titles

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 34 7.14 Sub-titles Where sub-titles are broadcast, this will be indicated by the message Sub-title select. If you have switched on the function Sub-titles (as per Point 6.3.3), these will be displayed automatically, provided that they are being broad- cast in the language selected.

  • Page 35: Interrupting The Download Procedure

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 35 You can also start the downloading procedure manually directly after switching off by pressing the SFI key (while the display shows „oooo“) During the downloading procedure volume of data already downloaded will be indicated in the display (e.g.

  • Page 36: Next

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 36 > press the TV/Radio key to return to normal opera- tion. 7.15.5 Next > Use the yellow function key to call up the table "Next" (next/following programmes) (Fig. 7-18). > The SFI functions (Point 7.15.7) are now available. >...

  • Page 37: Sfi Functions

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 37 7.15.7 SFI functions To execute the following SFI functions, call up the SFI as described in Point 7.15.3. 7.15.7.1 SFI information You can display brief information on the marked programme with the help of SFI Info. Where additional information is available, this will be indicated by the symbol next to the appropriate programme.
  • Page 38 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 38 Deleting the SFI timer event > If you would like to delete a timer event programmed by means of the SFI, proceed as described above for marking the appropriate programme. > Press the red function key Timer to open a selection window.

  • Page 39: Ending Sfi

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 39 7.15.7.4 SFI overview by programme type (Genre) f you are interested in specific types of programmes, you can have the programme information displayed by various gen- res, e.g. movies, news, etc.. > Press the SFI key to open the table “Now”. >...

  • Page 40: Programming The Timer Manually

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 40 functions of the remote control (e.g. calling up the main menu) will be deactivated. In stand-by mode, the active timer will be indicated by the blinking of the colon in the clock time resp.

  • Page 41: Timer Overview

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 41 Start > Use the arrow keys to mark the column Start. > In this line, use the numeric keys to enter the star- ting time for the timer. Stop > Repeat the steps as described under „Start” to enter the stopping time (except for channel-switching timer).

  • Page 42: Changing The Timer Programming

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 42 7.16.3 Changing timer programming > To change an existing timer setting, use the arrow keys up/down to mark the timer event you wish to change. > Press the green function key Change to go to the settings of the marked timer.

  • Page 43: Changing The Basic Programming

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 43 such as ZDF, etc. for approx. 30 seconds, to acquire the time. If it was activated under Point 6.2.4, the time should now be shown in the display in stand-by mode. 8 Changing the basic programming 8.1 Configuring the Favourites list This chapter describes how you may change the pre-pro- gramming of your digital receiver as well as the Favourites...
  • Page 44 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 44 > Press the red function key to move the marker to the Total list. This is now active. > Press the red function key again to open a selection window. Here you have the facility to display the Total list sorted in terms of various selection criteria (e.g.
  • Page 45 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 45 > Press the yellow function key Add to add the mar- ked programme to the Favourites list. Marking blocks To add a programme from the Total list to the Favourites list, call up the programme list manager as described in Point 9.1.1, and change to the Total list.

  • Page 46: Sorting Programmes

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 46 > When you have completed marking the desired pro- grammes in this manner, press the yellow function key Remove. The message will be displayed: “Remove program- me(s) from the list?”. > Use the arrow keys left/right to mark Yes or No. >...

  • Page 47: Programming The Electronic Programme Guide

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 47 > To sort several programmes simultaneously, mark these as described in Point 8.1.2 (Marking blocks). > Now press the yellow function key Sort. A double arrow will be displayed next to the program- me block selected.

  • Page 48: Updating Time

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 48 If you do not wish to receive the additional data, or if recep- tion is not possible at your location, data reception can also be switched off: > To switch off data reception, set the item Updating to off.

  • Page 49: Start Category

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 49 > Use the arrow keys to mark a channel you wish to include in the electronic programme guide. > Press the yellow function key SFI to include the marked channel in the electronic programme guide, resp.

  • Page 50: Manual Updating Of Sfi Data

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 50 Accepting/saving settings To save the settings made in this menu, please proceed as follows: > Press the green function key Accept to save the changes made to memory, and return to the menu Settings.

  • Page 51: Parental Control

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 51 8.3 Parental control Your receiver is equipped with a parental control function. This means that important functions (e.g. calling up the main menu) can be protected from unauthorised use. In addition, recordings and channels that you have blocked can only be accessed by entering a four-digit PIN code (unit PIN).

  • Page 52: Programme Scan

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 52 > When you have completed changing the PIN code in this manner, you will be taken back automatically to the menu Parental control. Note! Ensure that you do not forget the unit PIN code. If this does happen, please consult your retailer! 8.3.3 Selecting programmes >...

  • Page 53: Expanded Scan

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 53 Select this type of search to scan all the satellites set in the menu Antenna settings (Point 6.4 and 9.4), as well as the entire DVB-T range for programmes. 2. Expanded Scan Select this type of search to scan only a specific selected satellite or a specific frequency resp.
  • Page 54 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 54 Depending on the configuration of your antenna instal- lation, a scan can take 15 minutes or more. Please note any messages displayed on screen. 8.4.2 Expanded scan To scan a single satellite of a specific frequency or channel range for programmes, select the option Expanded scan.
  • Page 55 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 55 Stop channel/Stop frequency DVB-T > Use the arrow keys up/down to mark the line Stop channel resp. Stop frequency. > Use the arrow keys left/right to select the Stop channel resp. use the numeric keys to enter the Stop frequency.

  • Page 56: Manual Search

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 56 8.4.3 Manual search You can also scan a specific transponder resp. channel (see Point 10 Technical terms) for programmes. To do this, you must enter the transponder resp. channel data (Figs. 8-18 8-19). Selecting a source DVB-S, DVB-T >...

  • Page 57: Pid Search

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 57 Channel DVB-T > Use the arrow keys up/down to mark the line Channel. > Use the arrow keys left/right to select the Channel that is to be searched for programmes. Search/scan mode DVB-S, DVB-T >...

  • Page 58: After The Scan

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 58 > Confirm the message displayed on screen after the search, using the arrow keys left/right to mark the field Yes and confirm by pressing OK. Programmes generated in this manner will be designa- ted manual + consecutive numbers.

  • Page 59: Activating Factory Default Setting

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 59 changes made by the programme providers, delete the pro- gramme list completely and perform a new programme scan. Please note that after performing the delete function you must first start a programme scan, and must then transfer the desired programmes from the Total list to the Favourites list.

  • Page 60: Update Programme List (Isipro) Only Dvb-S

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 60 8.5.3 Updating the programme list (ISIPRO) nur DVB-S The ISIPRO programme list updating facility ensures the pro- gramme list of your receiver is automatically kept up to date. For this purpose, a current and updated programme list is transmitted at regular intervals via satellite (ASTRA 19,2°...
  • Page 61 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 61 > If a new list is available, mark the field Start update, and confirm by pressing OK. Your receiver will then re-start, and will display a mes- sage confirming the availablilty of a new programme list (Fig.
  • Page 62 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 62 8.5.3.4 Updating the programme list manually When the programme list has been downloaded completely, your programme list will be updated. To do this, the receiver will compare the existing Favourites list with the new pro- gramme list.

  • Page 63: Update Software

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 63 > To accept the programme displayed at the selected position of the Favourites list, press the green func- tion key to select Yes. Accept all programmes > To accept and transfer all new programmes without a further check, press the yellow function key Automatic.
  • Page 64 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 64 alternatively: > Press the red function key Back. > In the query window displayed, use the arrow keys left/right to mark the field Yes, if you wish to accept the changes, and confirm by pressing OK. You will now return to the previous menu.

  • Page 65: System Configuration

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 65 Independently of whether you have switched the automatic softweare updating function on or off, each time you switch the receiver off it will check automatically whether a new ver- sion of the operating software for your digital receiver is avai- lable.

  • Page 66: Encryption System

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 66 8.7 Encryption system Under this menu item you can go to the sub-menues of the CONAX Smartcard and of the CI module. By confirming the Smartcard or the CI module with OK, you can see informa- tion on the CI module used resp.

  • Page 67: Delete Existing Limits

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 67 If there are no obstacles in the rotating range of the dish, set the limits so that the dish can be rotated a little further than the most extreme locations of the satellites to be received. 9.1.1 Deleting existing limits First, you should delete any limits that may exist.

  • Page 68: Geo-Positioning

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 68 > Now press the arrow key left to rotate the dish to the maximum West position possible, resp. desirable. > Press the blue function key Actions to open the window with the available actions. >...

  • Page 69: Setting A Satellite Position

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 69 > Press the Back key to return to the LNB settings. The data relating to your location must be entered as a decimal value, correct to one decimal place. As the co- ordinates are often stated in degrees, minutes and seconds, these must be converted to decimal values as follows: The value for degrees is not affected by the conversion.
  • Page 70 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 70 grammed satellite position. The rotating procedure will be indicated by the blinking text display “turn”. If the Geo-positioning function is switched off, you must rotate the dish to the desired satellite position manually (Point 9.3.2.2).

  • Page 71: Saving A Satellite Position

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 71 > Use the arrow keys to mark the field Current satellite list. > Press the OK key to open the satellite list. > Use the arrow keys up/down to mark the satellite position for which you wish to change the data. >...

  • Page 72: Current Satellite List

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 72 must still save the satellite position in memory. > To do this, use the arrow keys to mark the field save. > Press the OK key. Now, the set test transponder is used to check whether a signal is being received at this position.

  • Page 73: Deleting A Satellite Position

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 73 > Confirm by pressing OK. > Press the yellow function key turn to sat to turn the antenna to the satellite position selected. 9.5 Deleting a satellite position To delete a satellite position from the satellite list, proceed as follows: >...

  • Page 74: Technical Terms

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 74 10 Technical Terms Antenna cable: Cable connection between the modulator of the satellite recei- ver and the antenna input of the television set. Used as an alternative where no SCART socket is available AV: see SCART Co-axial cable: Connection cable between LNB and satellite receiver,as well...
  • Page 75 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 75 1 Hz 1 Hertz 1 kHz 1 Kilohertz 1.000 1 MHz 1 Megahertz 1.000.000 1 GHz 1 Gigahertz 1.000.000.000 Frequency range: a) Satellite resp. LNB: 11 GHz range from 10,70 GHz - 11,70 GHz, 12 GHz range fromn 11,70 GHz - 12,75 GHz b) Receiver: Intermediate frequency, or 1.
  • Page 76 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 76 sion set. They are processed by the satellite receiver so that the audio and video (AV) signals produced at its outputs can be transmitted to the television set. Satellite receiver: see Receiver Satellite: Description of the satellite, usually consisting of the name and the orbital position, ASTRA...

  • Page 77: Technical Data

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 77 11 Technical data DVB-S tuner: Input frequency range 950 ..2150 MHz Input level range -65 dBm ... -25 dBm DBS tuner input F-socket Input impedance 75 Ohms AFC capture range +/- 3 MHz Demodulation Shaped QPSK Symbol rate...
  • Page 78 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 78 Audio decoding: Audio compression MPEG-1 & MPEG-2 Layer I and II Audio mode Dual (main/sub), Stereo Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz Audio parameters: Output analogue: Output levels L/R 0,5 V r.m.s. (nominal) Output impedance 600 Ohm >...
  • Page 79 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 79 Videotext: Teletext filtering in accordance with ETS 300 472 standard Scanning Teletext data (FBAS) corresponding to ITU-R BT.653-2 lines: 6-22 and 320-335 Soft videotext 1000 pages memory TV SCART: Output: FBAS, RGB or S-Video VCR-SCART: Input: FBAS;...

  • Page 80: Trouble-Shooting Guide

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 80 Subsystem address 8 (SAT 1), 10 (SAT 2) Modulation frequency 36 kHz Infrared wavelength 950 nm Power consumption: 3,2 W in stand-by mode (clock off) 3,7 W in stand-by mode (clock on) in operation, no LNB 15,5 W in operation, horizontal polarisation / 400 mA LNB current...
  • Page 81 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 81...

  • Page 82: Annexure

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 82 13 Annexure Problem Possible cause Solution Time not displayed while in stand-by Time not acquired Switch to major programme e.g. mode ZDF for approx. 30 seconds Switch on stand-by clock (Point 6.2.4) No reception when using an active Antenna feed (5V) not switched on Switch on antenna feed (Point 6.5) antenna...
  • Page 83 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 83 Problem Possible cause Solution Various programmes not shown Incorrect programme list selected Select other programme list (see correctly in programme list Point 7.2.3.1) Sound OK, no TV picture Radio mode selected Swith to TV mode Satellite programmes such as Pro 7, Interference from cordless DECT Increase distance between base...
  • Page 84 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 84 Co-ordinates of selected German cities (1) City/town Degrees longitude (E) Degrees latitude (N) Aachen 50,8 Augsburg 10,9 48,4 Berlin 13,4 52,5 Beucha 12,7 51,3 Bielefeld 52,0 Bonn 50,7 Brandenburg 12,6 52,4 Braunschweig 10,5 52,3 Bremen 53,1...
  • Page 85 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 85 Co-ordinates of selected German cities (2) City/town Degrees longitude (E) Degrees latitude (N) Kassel 51,3 Kiel 10,1 54,3 Koblenz 50,4 Köln 51,0 Krefeld 51,3 Landshut 12,2 48,5 Leipzig 12,4 51,3 Ludwigshafen 49,5 Lübeck 10,7 53,9 Lüneburg...

  • Page 86: Index

    BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 86 14 Index AC3 ........12, 21, 31, 80 Antenna settings (DVB-S) .
  • Page 87 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 87 Navigator ........27 East and West limits .
  • Page 88 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 88 Notes...
  • Page 89 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 89 Notes...
  • Page 90 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 90 For daily use Switching on and off > Switch the digital receiver on by pressing the On/Stand-by key either on the receiver or on the remote control. > Press this key again to switch the receiver off again. >...
  • Page 91 BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 91...

Table of Contents