I Front Control Panel Functions - Mitsubishi WS-65908 Owner's Manual

Part II: Installation
Front Control Panel
POWER
Figure 1. Front Control Panel.
IRIS™
Intelligent Room Illumination (light) Sensor. Turn this feature on or off using the VIDEO
button on your remote control. When the IRIS is on, your TV will automatically adjust
picture contrast and brightness for the best picture based on your room lighting. When on,
do not block the sensor to ensure an optimum picture.
Power (used for Timer function)
POWER
During normal operation, the power light will glow steady green when the TV is on, and
not glow when the TV is off. When the TV is set to turn on at a speci c ti m e , th e gr e en
power light will blink while the TV is off. Please see Timer, page 39, for timer setup
instructions.
A/V RESET
A/V Reset
Press this button to reset the A/V memory on all eleven inputs to the factory default settings.
Please see A/V Memory Reset, page 42, for instructions.
(MONO)
S-VIDEO VIDEO L
INPUT-4
This input can be used for convenient connection of a camcorder or other video device to
the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is
deactivated. The VIDEO terminal is active when there is no S-Video connection.
12
12
(MONO)
S-VIDEO VIDEO L AUDIO R
INPUT-4
AUDIO R
Input 4
INPUT
CANCEL
MENU
A/V RESET
ENTER
ADJUST