Mitsubishi Electric MDT321S User Manual page 28

ADVANCED OPTION
IR CONTROL
TILING
HEAT STATUS
TILING
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
ADVANCED OPTION
IR CONTROL
TILING
HEAT STATUS
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
ADVANCED OPTION
IR CONTROL
TILING
HEAT STATUS
POWER ON DELAY
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
ADVANCED OPTION
IR CONTROL
TILING
HEAT STATUS
DATE & TIME
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
ADVANCED OPTION
IR CONTROL
TILING
HEAT STATUS
SCHEDULE
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
ADVANCED OPTION
IR CONTROL
ADVANCED
TILING
HEAT STATUS
POWER ON DELAY
OPTION RESET DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL
TILING
H MONITORS
V MONITORS
POSITION
FRAME COMP
ENABLE
SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL + -:ADJ EXIT
HEAT STATUS
COOLING FAN1
COOLING FAN2
BRIGHTNESS
TEMPERATURE
SENSOR 1
SENSOR 2
SET :NEXT EXIT :RETURN MENU :EXIT MENU EXIT :RETURN
POWER ON DELAY
3 SEC.
+ -: ADJ
EXIT
SET :NEXT EXIT :RETURN MENU :EXIT MENU
DATE & TIME DATE & TIME
YEAR YEAR
MONTH MONTH
DAY DAY
TIME HOUR
MINUTE
DAYLIGHT SAVING DAYLIGHT SAVING
CURRENT DATE CURRENT DATE
JAN. 01. 2004 JAN. 01. 2004
SET :NEXT EXIT :RETURN MENU :EXIT MENU
SET SET :SET :SET
:SEL :SEL + -:ADJ + -:ADJ
SCHEDULE
TODAY 2005. 4. 15
1 ON OFF
2 08:30 17:15
3
4 EVERY DAY
5 WED THU FRI SAT
6 SUN EVERY WEEK
7
SET :NEXT EXIT :RETURN MENU :EXIT MENU
SET SET :SET :SET
:SEL :SEL + -:ADJ + -:ADJ
ADVANCED OPTION RESET
NO
YES
:SEL
SET :NEXT EXIT :RETURN MENU :EXIT MENU
English-26
1-28
TILING demonstrates multiple screens. This feature
provides a single large screen using up to 16 monitors.
It will be able to divide up to 4 each H and V.
This requires you to feed the PC output into each of the
monitors through a distributor.
H MONITORS: Select number of horizontal divide.
1
V MONITORS: Select number of vertical divide.
1
1
POSITION: Select a position to expand the screen.
YES / NO
YES / NO
FRAME COMP: Works in tandem with TILING to
:RETURN
compensate for the width of the tile bezels in order to
accurately display the image.
ENABLE: Select "YES", the monitor will expand the
selected position.
PIP and STILL and "DYNAMIC" ZOOM mode will be
disabled when "TILING" is activated.
Information of status for COOLING FAN, BRIGHTNESS
and TEMPERATURE.
COOLING FAN comes to run when inside temperature
ON
ON
NORMAL
is over a guaranteed limit.
0.0 C / 32.0 F
0.0 C / 32.0 F BRIGHTNESS comes to be decreased when inside
MENU :EXIT MENU
temperature is over guaranteed limit with cooling fun.
In this case warning is displayed on the screen.
Adjusts the delay time from "standby" to "power on"
mode.
"POWER ON DELAY" time is selectable between 0 and
:RETURN MENU :EXIT MENU
50 sec.
2004 2004
JANUARY JANUARY
01 01
Adjusts the current date and time for internal clock.
00
00 00 : 00
YES / YES / NO NO
You should set this function when you use "SCHEDULE".
TIME TIME
00 : 00 : 00 00 : 00 : 00
:EXIT MENU :EXIT MENU
EXIT EXIT :RETURN :RETURN MENU MENU
Programs the monitor's working schedule.
FRI 15:11
Schedule the power on and power off with hour and a day
INPUT
RGN1
of the week. Also sets the input port.
MON TUE
This OSD can't remove except EXIT.
(see "NOTE 2" on page 27 for further information)
EXIT EXIT :RETURN :RETURN
Selecting ADVANCED OPTION reset allows you to reset
all OSD settings from ADVANCED OPTION settings,
except for DATE & TIME, and SCHEDULE.
Select "YES" and press "SET" button to restore the
factory preset data.
EXIT :RETURN MENU :EXIT MENU
Press "EXIT" button to cancel and then return the
previous menu.