Maintenance Area; Comparison Table - Epson TM-H6000III Technical Reference Manual

1.9 Maintenance Area

The illustrations below show the area around the printer required for maintenance.
NOTE:203 mm =8"
56 mm =2.2"
345 mm =13.6"
282 mm =11.1"

1.10 Comparison Table

Differences between the TM-H6000III and the previous model, the TM-H6000II, are shown in
the following table.
Specification related items
Thermal print speed(slip)
Thermal print speed(Receipt)
Ladder barcode print speed
Paper feed speed
Paper Roll Supply Device Section
Paper roll end detection
Printing and Cutting Positions
Rev. C
TM-H6000II
Approximately 5.14lps
max 170mm/s (at24V,
Print density level 2)
max 114mm/s
Approximately 170 mm/s {6.7"/s}
continuous feeding
Detection method:
Reflective photo sensor
Manual cutter position:
Approximately 27
Auto cutter position:
Approximately 10.5
TM-H6000III Technical Reference Guide
TM-H6000III
Approximately 5.7lps
max 200mm/s (at24V,
Print density level 2)
max 118mm/s
Approximately 200 mm/s {7.9"/s}
continuous feeding
Detection method:
Micro switch
Manual cutter position:
Approximately 24
Auto cutter position:
Approximately 10
General Information 1-29