Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cantek CW-AR705-4
Summary of Contents for Cantek CW-AR705-4
-
Page 1: Digital Video Recorder
Digital Video Recorder Quick Operation Guide... -
Page 2: Table Of Contents
Quick Operation Guide of Digital Video Recorder TABLE OF CONTENTS DVR Pre-Installation ............................5 DVR Installation .............................. 5 Hard Disk Installation ............................. 5 Front Panels ..............................7 Rear Panels ............................... 9 Peripheral Connections ..........................10 Wiring of Alarm Input ........................... 10 Wiring of Alarm Output ........................ - Page 3 Quick Operation Guide of Digital Video Recorder Regulatory information FCC information This equipment has been tested and found to comply with the limits for a digital device, pursuant compliance: to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 4: Trademarks And Registered Trademarks
Quick Operation Guide of Digital Video Recorder Trademarks and Registered Trademarks Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. - Page 5 Quick Operation Guide of Digital Video Recorder Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to 2U chassis 1080p real time models of Turbo HD DVR. This product has default user name and password credentials for first time access.
-
Page 6: Dvr Pre-Installation
Quick Operation Guide of Digital Video Recorder DVR Pre-Installation The HD-TVI series DVR is highly advanced surveillance equipment that should be installed carefully. Please take into consideration the following precautionary steps before installation of the DVR. 1. Keep all liquids away from the DVR. 2. - Page 7 Quick Operation Guide of Digital Video Recorder 3. Connect one end of the data cable to the motherboard of DVR and the other end to the HDD. 4. Connect the power cable to the HDD. 5. Re-install the cover of the DVR and fasten screws.
-
Page 8: Front Panels
Quick Operation Guide of Digital Video Recorder Front Panels Description of Front Panel Name Function Description POWER ON/OFF Power on/off switch. IR Receiver Receiver for IR remote control. Connect to USB mouse or USB flash memory devices. DVD-R/W Slot for DVD-R/W. ALARM Alarm indicator turns red when a sensor alarm is detected. - Page 9 Quick Operation Guide of Digital Video Recorder Turn off audible key beeper by pressing and holding the button for 5 seconds; Start wiper (if applicable) in PTZ Control mode. The F1/LIGHT button when used in a list field will select all items on the list. F1/LIGHT In PTZ Control mode, it will turn on/off PTZ light.
-
Page 10: Rear Panels
Quick Operation Guide of Digital Video Recorder Rear Panels The rear panel vaires according to different models. Below take one as a example. Description of Rear Panel Item Description VIDEO IN BNC interface for TVI and analog video input. VIDEO OUT BNC connector for video output. -
Page 11: Peripheral Connections
Quick Operation Guide of Digital Video Recorder Peripheral Connections Wiring of Alarm Input The alarm input is an open/closed relay. To connect the alarm input to the device, use the following diagram. If the alarm input is not an open/close relay, please connect an external relay between the alarm input and the device. -
Page 12: Rs-485 And Controller Connection
Quick Operation Guide of Digital Video Recorder 3. Connect pluggable block back into terminal block. RS-485 and Controller Connection The rear pannel is vaious from different models, this picture is for reference only. To connect PTZ to the DVR: 1. Disconnect pluggable block from the RS-485 terminal block. 2. - Page 13 Quick Operation Guide of Digital Video Recorder are connected with each other via the R+ and R- of RS-485 serial interface. But due to the impedance of 485 wire, the longer the wire is, the greater the impedance gets. To avoid the signal reduction caused by the great impedance of long distance transmission, please connect two 120Ω...
-
Page 14: Specifications
Quick Operation Guide of Digital Video Recorder Specifications Table 1 Specification Model 16ch Video compression H.264 16-ch 4-ch 8-ch Analog and HD-TVI BNC interface (1.0Vp-p, 75 Ω) video input Supported camera types 720P/25, 720P/30, 720P/50, 720P/60, 1080P/25, 1080P/30, CVBS 2-ch(up to 6-ch) 2-ch(up to 10-ch) 2-ch(up to 18-ch) Video/Audio... - Page 15 Quick Operation Guide of Digital Video Recorder Dimensions (W × D × H) 445 × 470 × 90 mm (17.5 × 18.5 × 3.5 inch) Weight ≤8Kg (17.6 lb) (without hard disks)
-
Page 16: Hdd Storage Calculation Chart
Quick Operation Guide of Digital Video Recorder HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K... -
Page 17: Accessing By Web Browser
Quick Operation Guide of Digital Video Recorder Accessing by Web Browser Logging In You can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button. -
Page 18: Recording
Quick Operation Guide of Digital Video Recorder Name Description channel. Live View Window Displays the image of channel, and multi-window division is supported. Play Control Bar Play control operations are supported. Pan, tilt, zoom operations are supported, as well as preset editing and calling. PTZ Control PTZ function can only be realized if the connected camera supports PTZ control. -
Page 19: Playback
Quick Operation Guide of Digital Video Recorder 1) Configure All Day or Customize Record: If you want to configure the all-day recording, please check the All Day checkbox. If you want to record in different time sections, check the Customize checkbox. Set the Start Time and End Time. -
Page 20: Log
Quick Operation Guide of Digital Video Recorder 1. Click Playback on the menu bar to enter playback interface. 2. Click the camera from the device list for playback. 3. Select the date from the calendar and click Search. 4. Click the Play button to play the video file searched on the current date. 5. -
Page 21: Menu Operation
Quick Operation Guide of Digital Video Recorder Menu Operation Menu Structure The menu structure is shown below: Menu Playback Maintenance Export Manual Record Camera Shutdown Configuration Normal Record General Schedule General System Info Logout Event Alarm Advanced Encoding Image Alarm Shutdown Information Advanced... -
Page 22: Live View
Quick Operation Guide of Digital Video Recorder Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible. - Page 23 Quick Operation Guide of Digital Video Recorder The online cameras with same network segment will be displayed in the camera list. Click the button to add the camera. The added camera is marked in white while the camera not added is marked in yellow. Explanation of the icons Icon Explanation...
-
Page 24: Record
Quick Operation Guide of Digital Video Recorder You can edit the IP address, protocol, management port, and other information of the IP camera to be added. Click Add to add the camera. (For the encoders with multiple channels only) check the of Channel No. -
Page 25: Playback
Quick Operation Guide of Digital Video Recorder And click the Yes button in the popup Attention message box to confirm the settings. Then all the channels will start to record in the selected mode. Playback Play back the record files of a specific channel in the live view menu. ... -
Page 26: Backup
Quick Operation Guide of Digital Video Recorder The toolbar in the bottom part of Playback interface can be used to control playing process. Just check the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels. -
Page 27: Vca Alarm
Quick Operation Guide of Digital Video Recorder VCA Alarm Purpose: These series DVR can receive the VCA alarm sent by analog camera, and the VCA detection must be enabled and configured on the camera settings interface first. Perform the steps below to set the VCA configuration. The device can provide VCA capability of enabling linkage actions when detecting exceptional event, such as people, vehicles and objects cross a virtual line or intrude a pre-defined region. - Page 28 Quick Operation Guide of Digital Video Recorder Cloud P2P provides the mobile phone application and as well the service platform page to access and manage your connected DVR, which enables you to get a convenient remotely access to the surveillance system. Steps: Enter the Network Settings interface.