Table of Contents
Advertisement
3-8 PTZ Control
If you mount the IP camera on pan-tilt camera cradles that support
pan-tilt control via RS-485 connection, you can use this function to
control pan-tilt camera cradle so you can control the orientation of IP
camera from remote place.
Here are the descriptions of every setup item:
Item
Enable RS-485
Use Pelco-D
Address
Use Custom
Protocol
When you finish with above settings, click 'Apply' button to save
changes.
Description
Check this box to enable RS-485 functionality.
Select this option and RS-485 interface will output
pan-tile control signal in Pelco-D format. This format
is widely accepted by most of pan-tilt camera
cradles.
You have also input pan-tilt camera cradle's address
code in 'Address' field. This code must be identical to
pan-tilt camera cradle's address code.
When the pan-tilt camera cradle does not support
Pelco-D protocol, you can define a protocol's detail
by this function.
46
Advertisement
Table of Contents
