Black Box LW013 Instruction Manual page 7

24-DBI DIRECTIONAL ANTENNA
For Horizontal Polarity:
Refer to Figure 3-1 for proper feed alignment.
For Vertical Polarity:
Refer to Figure 3-2 for proper feed alignment.
3. Determine the polarity of the antenna. (See Figures 3-1 and 3-2.)
4. Place the "L" bracket on the back of the antenna. Insert two carriage bolts from the front (see Figure 3-4)
to attach. Secure on the back with the lock washers and nuts (see Figure 3-5).
5. Re-check the dipole feed assembly for the proper polarity (see Figures 3-1 and 3-2).
6. Attach the feed on the front with two carriage bolts. Secure on the back with the lock washers and nuts
(see Figure 3-4),
7. Place the two mast clamps on the two U-bolts (see Figure 3-6). Fasten the U-bolts on the "L" bracket with
the four lock washers and nuts (see Figure 3-5).
6
Figure 3-5. Attaching the "L" Bracket.
Mast Clamp