Connecting Wires To Terminals - Mitsubishi MZ360216EX Instruction Manual

Connecting Wires to Terminals

Front left output (White)/ Front right output (Red)
(KDC-MP4533 only)
Rear left output (White)/ Rear right output (Red)
To Kenwood disc changer/ External optional accessory
(KDC-MP4533/MP4033/MP4033S only)
To connect these leads, refer
to the relevant instruction
manuals.
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier,
connect to its power control terminal.
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
power terminal for the booster amplifier
of the film-type antenna.
Connect to the terminal that is grounded
when either the telephone rings or
during conversation.
To connect the
Kenwood navigation
system, consult your
navigation manual.
Ignition key
switch
Car fuse box
(Main fuse)
Battery
+
Fuse (10A)
To front left
speaker
To front right
speaker
To rear left
speaker
To rear right
speaker
Car fuse box
–
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT.
CONT
TEL mute wire (Brown)
MUTE
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
ACC
Ground wire (Black) - (To car chassis)
FM/AM antenna input
Wiring harness
(Accessory1)
FRONT L
FRONT R
REAR L
REAR R
Ignition wire (Red)
Battery wire (Yellow)
23
|
English