Important! Please Read - Inguiti Max Speed Instruction Manual

Inguity® Max Speed Micro Drone Parts
Included with your Inguity® Max Speed Micro Drone packaging are 8 propeller blades – 4 installed on your
quadcopter and 4 replacement blades packed separately. 4 propeller guards are also installed on the
quadcopter and 1 pair of landing extensions are packed separately. A 4 Channel Remote Controller comes
packaged with your drone as well. For additional parts and information, please see our website at
www.ingeniousingenuity.com or contact us directly at 1-800-834-5279 for personal support during business
hours.

IMPORTANT! PLEASE READ.

Inguity® Max Speed Micro Drone
The design and development of the Inguity® Max Speed Micro Drone ensures that when used properly, all
components are secured and fit for flight. Proper installation of the battery and any replacement propellers
will avoid damage to your unit. Please follow the steps below for a safe and easy way to install and uninstall
the battery and replacement propellers for a damage free process.
Installing Replacement Propellers
In the event that a propeller incurs damage and requires replacement, grip the propeller at the center of
rotation and pull upwards while holding the quadcopter at the motor housing. Do not apply force to the
blade guards or other fragile components of the quadcopter. In the event that the propeller will not easy
release, use a small flat head screw driver to wedge under the propeller and remove it from the motor shaft.
Once the damaged propeller has been uninstalled, select the matching propeller type. Note: There are 2
types of propellers (A and B blades). Be sure to install the correct blade style when replacing a damaged
propeller. Once the correct blade has been selected, press the blade onto the motor shaft at the center of
rotation until it appears secure.
www.ingeniousingenuity.com