Table of Contents
Advertisement
Item
Definition
15
NB/ANL/ANL/OFF switch: Reduces external noise and interfer-
ence from vehicle ignition systems.
16
S/RF/SWR/ CAL switch: Selects meter function. S/RF- normal;
SWR and CAL are for SWR measurements only. See page 11 for
calibration procedures.
17
Multi-function meter: Measures SWR, RF and S signal strength.
REAR VIEW
Item
Definition
18
Antenna socket: Connects antenna cable to transceiver.
19
PA SP. jack: Connects external 8-ohm, 4-watt speaker.
To prevent acoustic feedback, separate the microphone from the
speaker when operating the PA at high output levels.
20
EXT. SP. jack: Connects optional 8-ohm 4-watt speaker to remotely
monitor the receiver.
When the external speaker is plugged in, the internal speaker is off.
21
POWER connector: Connects DC power to transceiver
INSTALLATION
MOBILE INSTALLATION
Plan the location of the transceiver and microphone bracket before
beginning installation.
1. Select a location that is convenient for operating the radio, but
does not interfere with the driver or passenger.
18
19
21
7
20
Advertisement
Table of Contents
