Plug Replacement-Uk And Ireland Only - Seiki SE32HY01UK User Manual

The audio function does not work
Picture OK but no sound
No output from one of the
speakers
Unusual sound from inside
the TV
No sound when connecting
HDMI
Audio noise
Password
Lost password
There is a problem in PC mode
The signal is out of range
(invalid format)
Vertical bar or stripe on
background and Horizontal
Noise and Incorrect position
Screen color is unstable or
show a single color
Plug replacement - UK and Ireland only
Should you need to replace the plug; the wires in
the power cable are coloured in the following way:
Blue – Neutral 'N'
Brown – Live 'L'
As the colours of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug, and proceed
as follows:
The blue wire must be connected to the terminal
that is marked with the letter N.
The brown wire must be connected to the terminal
that is marked with the letter L.
If the power lead is damaged, it must be replaced by
34
• Press the VOL +/- buttons.
• Sound muted? Press the MUTE button.
• Try another channel. The problem may be caused by the
broadcaster.
• Adjust the Balance settings in the SOUND menu.
• A change in ambient humidity or temperature may result in
an unusual noise when the TV is switched on or off and does
not indicate a fault with the TV.
• Check if the input source is HDMI1/HDMI2/HDMI3.
• Keep the RF coaxial cable away from the other connected
cables.
• Select the Enter Password in the LOCK Systerm menu,
then enter the following master password"8899". Then you
can set a new password though the New Password option.
• Adjust the resolution, horizontal frequency, or vertical
frequency.
•
• Check the signal cable.
• Reinstall the PC video card.
TROUBLESHOOTING
Connect
N
blue lead
to 'N' -
Neutral
Connect
brown lead
to 'L' - Live
L