Draytek Vigor2930 Series User Manual page 48

Protocol
WAN
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down Use Up or Down link to move the order of the policy.
Click Index 1 to access into the following page for configuring load-balance policy.
Enable
Protocol
Use the drop-down menu to change the protocol for the WAN
interface.
Use the drop-down menu to change the WAN interface.
Display the IP address for the start of the source IP.
Display the IP address for the end of the source IP.
Display the IP address for the start of the destination IP.
Display the IP address for the end of the destination IP.
Display the IP address for the start of the destination port.
Display the IP address for the end of the destination port.
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the WAN
interface.
40
Vigor2930 Series User's Guide