ClearWater CWC-9 Installation Manual page 2

Step 1: Parts and Overview
Please be sure to read our instructions thoroughly before
Congratulations on your purchase of the ultimate car audio upgrade
available for the Mazda Miata/MX5!
Below are some of the features associated with this speaker component set:
• This system was specifically designed for the Miata/MX5.
• Hundreds of hours have gone into the testing and design of this audio system.
• Measurements were made with the industry's top equipment.
• No other speakers in the world have been so meticulously designed
specifically for one vehicle.
• The system was designed so that anyone can install it with minimal tools.
• As with all Clearwater purchases your satisfaction is guaranteed!!
We are passionate about our audio and you should be too!
Parts Included:
1. Door Speakers (2)
2. Custom Tweeters (2)
3. Sound Modules (2)
4. Screws (8)
5. Large Zip Tie (Cable Ties) (2)
6. Small Zip Ties (Cable Ties) (12)
7 . Door speaker water shields (2)
8. Installation Manual (1)
Page 2
attempting installation.
Tools Needed:
1. Phillips Head
Screwdriver #2
2. Knife or wire cutters
3. Pliers
4. Small (very small) flat
head screwdriver